A ductile steel component has a yield strength σy = 300 MPa. At a critical point, the principal stresses are σ1 = 200 MPa (tensile), σ2 = 100 MPa (tensile) and σ3 = 0. What is the factor of safety against yielding according to the Maximum Shear Stress Theory?
Asked in GPSC Gujarat Engineering Service (Civil), Class-1 and Class-2 2026
Answer under review: our editors are checking this question. Try the other GPSC Prelims previous year questions questions meanwhile.
More GPSC Prelims previous year questions questions
- A component made of steel (yield strength σy = 400 MPa) is subjected to plane stress: σ1 = 220 MPa, σ2 = 80 MPa and τ12 = 60 MPa. What is the von Mises stress and is the component safe according to the Distortion Energy Theory?
- A critical concrete beam in a bridge is experiencing the following stresses at a point where the axial tension threatening to crack is 80 MPa, the lateral pressure resisting deformation is 40 MPa and the shear stress trying to slide it apart is 30 MPa. Determine the radius of Mohr’s Circle to assess failure risk.
- A reinforced concrete beam-column joint in a seismic-resistant frame is subjected to pure shear stress due to earthquake loading. The stress state at the joint is given as follows: Shear stress τ12 = 50 MPa and Normal stresses σ1 = σ2 = 0. What is the maximum normal stress developed at the joint?
- A steel bridge girder instrumented with strain gauges records the following at a critical point during a load test: Longitudinal strain (ε1) : 90 × 10–6 Transverse strain (ε2) : −60 × 10–6 Engineering shear strain (γ12) : 120 × 10–6 The maximum in-plane engineering shear strain is
- A structural steel component (yield stress = 300 MPa) is subjected to the following principal stresses under plane stress conditions: σ1 = 180 MPa (tensile) σ2 = −80 MPa (compressive) σ3 = 0 MPa Using the Maximum Shear Stress Theory, determine the safety condition of the component.
- Given σ1 = 80 MPa, σ2 = 20 MPa and τ12 = 30 MPa, calculate the maximum principal stress.
- A rectangular beam 200 mm wide × 300 mm deep is subjected to a 30 kN-m bending moment. Find the maximum bending stress.
- A solid circular shaft of diameter 50 mm transmits a torque of 0.3 kN-m. What is the maximum shear stress?