71 Ascensionally ventilated coal mine inclines ideally should have a higher methane layering number when compared to descensionally ventilated inclines. The reason is:
Asked in HPSC to Final Answer Key of the Master Question Booklet of the Screening Test for the Posts of Mining Officer (Advt. No. 08/) & Assistant Mining Engineer (Advt No. 09/) 2023
Show answer
Answer: D. Ascensionally ventilated incline creates conditions for improved turbulent mixing of methane layer.
More HPSC Prelims previous year questions questions
- 72 Samples of air collected in the intake and return gate roads of an advancing longwall face show 0.25 % and 0.75% CH4 respectively. The panel has a production of 500 t in an 8 hours shift when an air quantity of 20 m3/sec passes through it. What is the methane emission in m3/te of coal mined ?
- 73 A centrifugal fan rotating at 600 rpm delivers 80 m3/sec of air. If the speed is reduced to 450 rpm, the quantity of air delivered in m3/sec will be:
- 74 Free respirable silica in mine dust can be determined by:
- 75 Which of the following is the most important fan characteristic in order to decide its applicability to a particular mine?
- 76 Prolonged exposure to whole-body vibration is known to be associated with :
- 77 Which type of fire extinguisher should not be used to extinguish an electrical fire?
- 78 The quantity of air going down a D.C. shaft is 20 m3/sec. The surface main ventilator develops water gauge of 60 mm. When the ventilator is stopped the air going down the shaft is 5 m3/sec. What is the natural ventilation pressure (NVP) in mm w.g. assisting the fan?
- 79 Hoolamite tube which is used for detection of carbon monoxide consists of a mixture of: