Keywords: Rectangular plot, dimensions, rectangular tank, soil, surface height, increase.

Required Approach: Factual and analytical. The question requires calculating a volume and then determining the resulting change in height based on that volume.

Points to Remember:

  • Calculate the volume of the tank.
  • Calculate the area of the remaining plot after the tank is dug.
  • Determine the increase in height by dividing the tank's volume by the remaining plot's area.

Introduction:

This problem involves calculating the increase in the surface height of a rectangular plot after a rectangular tank is dug within it. We will use basic geometric formulas for volume and area to solve this. The problem highlights the practical application of geometry in everyday scenarios, such as construction or landscaping.

Body:

1. Calculating the Volume of the Tank:

The volume of a rectangular tank is given by the formula: Volume = Length × Width × Height.

In this case, the dimensions of the tank are 5m × 4.5m × 2.1m.

Therefore, the volume of the tank is: 5m × 4.5m × 2.1m = 47.25 cubic meters.

2. Calculating the Area of the Remaining Plot:

The total area of the rectangular plot is: 13.5m × 2.5m = 33.75 square meters.

The area of the tank is: 5m × 4.5m = 22.5 square meters.

The area of the remaining plot after the tank is dug is: 33.75 square meters - 22.5 square meters = 11.25 square meters. Note that this calculation assumes the tank is entirely within the plot. If the tank were partially outside the plot, the calculation would be more complex and require additional information.

3. Calculating the Increase in Surface Height:

The volume of soil removed from the tank (47.25 cubic meters) is spread uniformly over the remaining plot area (11.25 square meters). To find the increase in height, we divide the volume by the area:

Increase in height = Volume of soil / Area of remaining plot = 47.25 cubic meters / 11.25 square meters = 4.2 meters.

Therefore, the surface height of the remaining plot increases by 4.2 meters.

Conclusion:

In summary, by calculating the volume of the dug tank and dividing it by the area of the remaining plot, we determined that the surface height of the plot increases by 4.2 meters. This calculation demonstrates a practical application of geometric principles. It's crucial to note that this calculation assumes the tank is completely within the plot boundaries and that the soil is spread evenly. In real-world scenarios, factors like soil compaction and uneven spreading could affect the final height. Further analysis could involve considering these real-world factors for a more accurate prediction. This problem highlights the importance of accurate measurements and calculations in engineering and construction projects to ensure efficient resource management and structural integrity.