A solid circular shaft of diameter 40 mm is subjected to a torque of 1 kNm. The maximum shear stress (in MPa) is
Asked in GPSC Gujarat Engineering Service (Civil), Class-1 and Class-2 2026
Answer under review: our editors are checking this question. Try the other GPSC Prelims previous year questions questions meanwhile.
More GPSC Prelims previous year questions questions
- Who developed the Moment Distribution Method?
- A tension member of IS 800:2007 is made of a single angle ISA 75 × 75 × 6 mm (area = 866 mm2) with one leg connected to a gusset plate by 2 bolts of 16 mm diameter. Gross diameter of bolt hole = 18 mm. The net effective area (in mm2) as per the limit state method is
- A three-hinged parabolic arch of span 20 m and rise 5 m carries a point load of 80 kN at 5 m from left support. The horizontal thrust (in kN) is
- A simply supported steel beam of span 6 m carries a uniformly distributed load of 20 kN/m (factored). The steel yield strength fy = 250 MPa. Using the limit state method as per IS 800:2007, the required plastic section modulus (in cm3) is
- A short column of size 300 mm × 300 mm is subjected to an axial factored load of 1200 kN. Using M20 concrete and Fe415 steel, the minimum area of longitudinal reinforcement (in mm2) as per IS 456 is
- A singly reinforced rectangular beam of width 250 mm and effective depth 450 mm is made of M25 concrete and Fe500 steel. The limiting moment of resistance (in kNm) as per IS 456:2000 is
- The fundamental natural period (Ta) for an RC moment-resisting frame building of height 30 m, as per IS 1893 empirical formula is approximately
- For a masonry building in seismic Zone III, as per IS 4326, the horizontal bands are mandatory at