You want to draw an arc of a circle using the Three-Point method. Which parameters are required?
Asked in GPSC Graduate Engineer Trainee, Class-2, Gujarat Maritime Board (GMB) 2026
Show answer
Answer: A. Three points on the arc.
More GPSC Prelims previous year questions questions
- Consider the following pairs of parts 1. Pair of gear in mesh 2. Belt and pulley 3. Cylinder and piston 4. Cam and follower Among these, the higher pairs are
- The spinning body, which is free to move in other directions under the action of external forces, is called as
- A disc spinning on its axis at 20 rad/s will undergo precession when a torque 100 Nm is applied about an axis normal to it. If the mass moment of inertia is 1 kgm2, then angular velocity of precession is
- A rotating mass having a moment of inertia of 30 kgm2 rotates at 800 rpm and is travelling in a curve of a 170-metre radius at a speed of 240 km/hr. It will experience a gyroscopic reaction of __________.
- In a cam follower motion, the follower has constant acceleration when it moves with
- The amplitude of underdamping a small damping varies with time _________.
- A linear spring-mass-dashpot system with a mass of 2 kg is set in motion with viscous damping. If the natural frequency is 15 Hz and the amplitudes of two successive cycles measured are 7.75 mm and 7.20 mm, the coefficient of viscous damping (in Ns/m) is
- In longitudinal vehicle dynamics, which of the following force is insignificant external longitudinal force acting on the vehicle?