A 200 V shunt DC motor runs at a speed where the back e.m.f. is 180 V. Armature resistance (including brushes contact) is 0.4Ω. The armature current at this operating point is [A] 100 A [B] 50 A [C] 150 A [D] 500 A
Asked in APPSC (Arunachal) Question Booklet (Set-A) of Paper I and Paper II 2026
Show answer
Answer: A. 100 A
More APPSC Prelims previous year questions questions
- A series RLC circuit has quality factor Q = 25 at a resonant frequency of 5 kHz. The bandwidth of the circuit is [A] 200 Hz [B] 100 Hz [C] 50 Hz [D] 5000 Hz
- In a domestic wiring plan, the main factor for selecting cable size is
- A material with negative temperature coefficient of resistance is
- An EHV transmission line operates at 400 kV. If the surge impedance of the transmission line is 200Ω, then Surge Impedance Loading (SIL) is
- A practical capacitor is represented by an ideal capacitor of capacitance value 2μF and a series resistance of 1kΩ. The dissipation factor of the capacitor at 50 Hz is
- Unit of solar irradiance is
- The material commonly used as sheath for high voltage cables is
- In a single-phase fully controlled rectifier with continuous current, for what value of firing angle α, the average output voltage becomes zero?