A bitumen sample has been graded as VG30 as per IS : 73-2013. The '30' in the grade means that
Asked in APPSC (Arunachal) Question Booklet (Set-A) of Paper I and Paper II 2026
Show answer
Answer: B. viscosity of bitumen at 60 °C is between 2400 and 3600 poise
More APPSC Prelims previous year questions questions
- A survey line was measured to be 285.5 m with a tape having a nominal length of 30 m. On checking, the true length of the tape was found to be 0.05 m too short. If the line lay on a slope of 1 in 10, the reduced length (horizontal length) of the line for plotting of survey work would be
- Bituminous materials are commonly use in highway construction because of their good
- The following statements are related to temperature stresses developed in concrete pavement slabs with free edges (without any restraint) : (P) The temperature stresses will be zero during both day and night times if the pavement slab is considered weightless. (Q) The temperature stresses will be compressive at the bottom of the slab during night if the self-weight of the pavement slab is considered. (R) The temperature stresses will be compressive at the bottom of the slab during day time if the self-weight of the pavement slab is considered. The true statement(s) is(are)
- A soil sample has a void ratio of 0.5 and its porosity will be close to
- The two criteria for the determination of allowable bearing capacity of a foundation are
- The following two statements are made with reference to the calculation of net bearing capacity of a footing in pure clay soil (\(\phi = 0\)) using Terzaghi's bearing capacity theory. (i) Increase in footing width will result in increase in bearing capacity. (ii) Increase in depth of foundation will result in higher bearing capacity. Identify if they are true or false.
- A clayey soil has a maximum dry density of 16 kN/m³ and optimum moisture content of 12%. A contractor during the construction of core of an earth dam obtained the dry density 15.2 kN/m³ and water content 11%. This construction is acceptable because
- When a retaining wall moves away from the back-fill, the pressure exerted on the wall is termed as