This problem involves the image charge method for calculating the force between a point charge and a grounded conducting plate. When a charge $q$ is placed at a distance $d$ from a grounded conducting plate, it induces an "image charge" $-q$ at a distance $d$ behind the plate. The force between the original charge and the plate is equivalent to the force between the original charge $q$ and its image charge $-q$, separated by a distance $2d$.In this case, $q = 1$ C, and the distance from the plate is $d = 1$ m. The distance between the charge and its image is $2d = 2$ m. The force $F$ between two charges $q_1$ and $q_2$ separated by a distance $r$ is given by Coulomb's Law: $F = \frac{1}{4\pi\epsilon_0} \frac{|q_1 q_2|}{r^2}$.Here, $q_1 = q = 1$ C, $q_2 = -q = -1$ C, and $r = 2d = 2$ m. So, $F = \frac{1}{4\pi\epsilon_0} \frac{|(1)(-1)|} {(2)^2} = \frac{1}{4\pi\epsilon_0} \frac{1}{4} = \frac{1}{16\pi\epsilon_0}$ N.However, this is the force between the charge and its image. The force between the charge and the grounded conducting plate is often derived differently or can be visualized as the force exerted by the induced charges on the plate. For a point charge $q$ at distance $d$ from an infinite grounded conducting plane, the force exerted by the plane on the charge is attractive and its magnitude is $F = \frac{1}{4\pi\epsilon_0} \frac{q^2} {(2d)^2}$.Let's re-examine the standard derivation for the force between a point charge and a grounded conducting plane using the image charge method. The image charge $-q$ is located at a distance $d$ behind the plane, making the total separation between the original charge and the image charge $2d$. The force between the original charge $q$ and the image charge $-q$ is: $F_{image} = \frac{1}{4\pi\epsilon_0} \frac{q \cdot (-q)}{(2d)^2} = \frac{1}{4\pi\epsilon_0} \frac{-q^2}{4d^2}$. The negative sign indicates attraction. The magnitude of the force exerted by the grounded conducting plate on the charge is the magnitude of this force: $|F| = \frac{1} {4\pi\epsilon_0} \frac{q^2}{4d^2}$.Given $q = 1$ C and $d = 1$ m: $|F| = \frac{1}{4\pi\epsilon_0} \frac{(1 \text{ C})^2}{4 \times (1 \text{ m})^2} = \frac{1}{4\pi\epsilon_0} \frac{1}{4} = \frac{1} {16\pi\epsilon_0}$ N.There seems to be a discrepancy with the provided options. Let's consider another interpretation or a potential error in common formulations.A key aspect of the image charge method for a grounded conductor is that the induced charge on the conductor effectively mimics the force of a point charge located symmetrically behind the surface. The force on the charge $q$ is the force between $q$ and its image $-q$.Let's review the force calculation more carefully. The force experienced by the charge $q$ due to the induced charges on the conducting plate is attractive. The image charge method models this as the force between the original charge $q$ and its image charge $-q$, separated by a distance equal to twice the original distance from the plane. So, $q_1 = q$ at position $d$, and $q_2 = -q$ at position $-d$ (relative to the plane). The total distance between them is $2d$. The force is $F = \frac{1}{4\pi\epsilon_0} \frac{q \cdot (-q)}{(2d)^2} = \frac{-1} {4\pi\epsilon_0} \frac{q^2}{4d^2}$. The magnitude of the force is $F = \frac{1}{16\pi\epsilon_0} \frac{q^2}{d^2}$.With $q=1$C and $d=1$m, $F = \frac{1}{16\pi\epsilon_0}$ N. This is option C.However, if the question or options are based on a specific convention where the force is calculated slightly differently or if there's a common mistake or simplified approach sometimes taught, it might lead to other answers.Let's reconsider the possibility that the distance to the image is $d$ and the original charge is at distance $d$, making the total distance $d+d = 2d$. The force between $q$ and $-q$ is $\frac{1} {4\pi\epsilon_0} \frac{q(-q)}{(2d)^2}$.Let's check if there's any specific result for a charge near a grounded plate. The force between a point charge $q$ and an infinite grounded conducting plane at distance $d$ is $F = \frac{1}{4\pi\epsilon_0} \frac{q^2}{4d^2}$.If $q=1$C and $d=1$m, $F = \frac{1}{4\pi\epsilon_0} \frac{1} {4(1)^2} = \frac{1}{16\pi\epsilon_0}$ N.There seems to be a consistent result of $\frac{1} {16\pi\epsilon_0}$ N. Given the options, and the common derivation using the image charge, option C appears to be the correct one. However, the provided correct answer is B. Let's explore why it might be B.Could there be a misunderstanding of "near"? If $d$ is very small, the electric field from the induced charges becomes very strong.Let's assume the provided correct answer "B) $\frac{1}{8\pi\epsilon_0}$ N" is indeed correct, and try to reverse-engineer it. If $F = \frac{1}{8\pi\epsilon_0}$, then: $\frac{1} {4\pi\epsilon_0} \frac{q^2}{(2d)^2} = \frac{1} {8\pi\epsilon_0}$ $\frac{q^2}{4d^2} = \frac{1} {2}$ $q^2 = 2d^2$. With $q=1$ and $d=1$, this gives $1=2$, which is false.Let's assume the formula is $F = \frac{1}{4\pi\epsilon_0} \frac{q^2}{k \cdot d^2}$ for some factor $k$. If $F = \frac{1}{8\pi\epsilon_0}$, then $\frac{1} {4\pi\epsilon_0} \frac{q^2}{(2d)^2} = \frac{1} {8\pi\epsilon_0} \implies \frac{q^2}{4d^2} = \frac{1}{2}$.Let's consider the possibility that the problem is not about an infinite plane, but some other geometry, or that the question implies something else. However, "grounded conducting plate" usually implies an infinite plane in such problems unless specified otherwise.A common source of confusion or different results in electrostatics problems can arise from how distances are measured or if the problem is a simplification.Let's try to find a scenario that yields $\frac{1}{8\pi\epsilon_0}$ N. If the formula were $F = \frac{1}{4\pi\epsilon_0} \frac{q^2}{(2d) \cdot (\sqrt{2}d)}$ or something unusual.Let's re-verify the standard image charge result. For a charge $q$ at $(0, 0, d)$ above a grounded conducting plane in the $xy$- plane (z=0), the image charge is $-q$ at $(0, 0, - d)$. The distance between them is $2d$. The force is $F = \frac{1}{4\pi\epsilon_0} \frac{q(-q)} {(2d)^2} = -\frac{1}{16\pi\epsilon_0} \frac{q^2} {d^2}$. The magnitude is $\frac{1}{16\pi\epsilon_0} \frac{q^2}{d^2}$. With $q=1$C and $d=1$m, this yields $\frac{1}{16\pi\epsilon_0}$ N.Could there be an error in the provided answer key for this question? It's a very common physics problem, and the result of $\frac{1} {16\pi\epsilon_0}$ N for $q=1, d=1$ is standard.Let's consider if the "plate" has a finite size and the charge is at the center. But usually, "plate" without dimensions implies an infinite plane.Another possibility is that the question is flawed or is from a source with an error. If we assume the answer is B, $\frac{1}{8\pi\epsilon_0}$ N, then we are looking for: $\frac{1} {4\pi\epsilon_0} \frac{q^2}{4d^2} = \frac{1} {8\pi\epsilon_0}$ $\frac{q^2}{4d^2} = \frac{1} {2}$ $q^2 = 2d^2$. This requires $q = \sqrt{2} d$. If $d=1$, then $q=\sqrt{2}$. Or if $q=1$, then $d = 1/\sqrt{2}$. Neither matches the given values.Let's assume there's a typo in the question or options or the provided answer. If the question was about the force between $q$ and its image, and the distance between them was $ \sqrt{2}d$, then $F = \frac{1}{4\pi\epsilon_0} \frac{q^2}{(\sqrt{2}d)^2} = \frac{1}{4\pi\epsilon_0} \frac{q^2}{2d^2}$. If $q=1, d=1$, then $F = \frac{1}{8\pi\epsilon_0}$ N. This would happen if the image charge was not directly behind the point charge but at some angle, which is not the case for a planar surface.Let's consider a scenario where the distance between the charge and the plate is $d$, and the induced charge is effectively located at a distance $d$ behind the plate, such that the total distance is $d+d = 2d$. Force $= \frac{1}{4\pi\epsilon_0} \frac{q^2} {(2d)^2}$.What if the question implied "the distance from the charge to the nearest point on the plate is 1m"? This is already what $d=1$m implies.Let's try to interpret the options as proportional to some standard form. The standard form is proportional to $q^2/d^2$. Options are of the form $\frac{X}{\pi\epsilon_0}$. A) $ \frac{1}{4\pi\epsilon_0}$ B) $\frac{1}{8\pi\epsilon_0}$ C) $\frac{1}{16\pi\epsilon_0}$ D) $16\pi\epsilon_0$The standard formula gives $ \frac{1}{16\pi\epsilon_0}$ with $q=1, d=1$. This is option C. If the correct answer is indeed B, there must be some reasoning that leads to $ \frac{1}{8\pi\epsilon_0}$.Let's consider a very specific scenario: what if the conducting plate is not infinite but a hemisphere or a sphere? For a sphere of radius R, if the charge q is at distance d from the surface, the image charge position and value are different. But the problem states "plate".Given the strong evidence for $\frac{1} {16\pi\epsilon_0}$, and the fact that option B is provided as the correct answer, it is highly probable that there is an error in the question's provided answer.However, if we are forced to choose the "best" answer assuming some obscure interpretation or common error:Could it be related to the electric field and force? Electric field due to an infinite charged plane is constant. But this is a conductor.Let's consider a situation where the effective distance for interaction is not $2d$. If the effective distance were $\sqrt{2}d$, then $F = \frac{1}{4\pi\epsilon_0} \frac{q^2} {(\sqrt{2}d)^2} = \frac{1}{4\pi\epsilon_0} \frac{q^2}{2d^2} = \frac{1}{8\pi\epsilon_0} \frac{q^2}{d^2}$. With $q=1, d=1$, this yields $ \frac{1}{8\pi\epsilon_0}$ N. What physical scenario would lead to an effective distance of $ \sqrt{2}d$? This is unusual for a planar conductor.Let's assume the provided answer (B) is correct and work backwards. $F = \frac{1}{8\pi\epsilon_0}$. If the formula for force is $F = \frac{1} {4\pi\epsilon_0} \frac{q^2}{(2d)^2}$, then $q=1, d=1$ gives $\frac{1}{16\pi\epsilon_0}$. If the formula was $F = \frac{1}{4\pi\epsilon_0} \frac{q^2}{(D)^2}$, where D is the effective distance. If $F = \frac{1}{8\pi\epsilon_0}$, then $ \frac{1}{4\pi\epsilon_0} \frac{1}{D^2} = \frac{1} {8\pi\epsilon_0} \implies \frac{1}{D^2} = \frac{1} {2} \implies D^2 = 2 \implies D = \sqrt{2}$. So, if the effective distance between the charge and its "image" were $\sqrt{2}$ m, the force would be $ \frac{1}{8\pi\epsilon_0}$ N. This is not the standard result for an infinite conducting plane.Could it be related to the distance to the center of induced charge distribution?Let's check some authoritative sources. Standard textbooks and online resources consistently state that the force between a point charge $q$ and an infinite grounded conducting plane at distance $d$ is $\frac{1}{4\pi\epsilon_0} \frac{q^2} {4d^2}$.Given that the question is from UPSC style MCQs, there's a possibility of a question having an error or based on a less common formulation. However, without further context or clarification, the standard physics answer leads to $\frac{1}{16\pi\epsilon_0}$ N.Let me assume, for the sake of providing an answer based on a potential interpretation that leads to B, that the effective interaction distance is indeed $\sqrt{2}$ times the actual distance. This is purely hypothetical to match the answer. If the force law was adjusted such that the interaction distance became effectively $\sqrt{2}d$, then $F = \frac{1}{4\pi\epsilon_0} \frac{q^2}{(\sqrt{2} d)^2} = \frac{1}{4\pi\epsilon_0} \frac{q^2} {2d^2} = \frac{1}{8\pi\epsilon_0}$ for $q=1, d=1$. This would imply that the image charge is not at $2d$ separation, but somehow equivalent to an interaction over $\sqrt{2}d$. This is highly unconventional.Let me proceed with the most likely standard physics interpretation, which leads to C, but acknowledge the discrepancy with a potentially provided answer key.Standard Derivation The force between a charge $q$ and a grounded conducting plane is calculated using the image charge method. The grounded plane induces a charge $-q$ at a position symmetrically opposite to the original charge, at a distance $d$ behind the plane. The total distance between the original charge $q$ and the image charge $- q$ is $2d$. The force $F$ between $q$ and $-q$ is given by Coulomb's Law: $F = \frac{1} {4\pi\epsilon_0} \frac{|q \cdot (-q)|}{(2d)^2}$ $F = \frac{1}{4\pi\epsilon_0} \frac{q^2}{4d^2}$Given: $q = 1$ Coulomb $d = 1$ meterSubstituting these values: $F = \frac{1}{4\pi\epsilon_0} \frac{(1 \text{ C})^2}{4 \times (1 \text{ m})^2}$ $F = \frac{1}{4\pi\epsilon_0} \frac{1}{4}$ $F = \frac{1}{16\pi\epsilon_0}$ NThis result corresponds to Option C.However, if the provided correct answer is indeed Option B ($\frac{1} {8\pi\epsilon_0}$ N), then the underlying physics or the question's premise might be interpreted differently or contain an error. A hypothetical scenario that yields this result would be if the effective interaction distance was $\sqrt{2}d$ instead of $2d$, such that $F = \frac{1}{4\pi\epsilon_0} \frac{q^2}{(\sqrt{2}d)^2} = \frac{1} {8\pi\epsilon_0}$ for $q=1, d=1$. This is not derived from standard electrostatics for a planar conductor.Given the prompt to provide the correct answer and explanation, and assuming the question is well-posed according to standard physics principles, Option C is the derived answer. If an external answer key states B, then the question/answer key is likely erroneous. I will present the standard derivation.
A charge of 1 coulomb is placed near a grounded conducting plate at a distance of 1 m. What is the force between them?
Asked in GS&EI ElectEngg 14 2024 1601 2025 · Topic: Electric Current (Ohm's Law, resistance, resistivity, and conductivity)
More Physics questions
- A DC series motor is driving a constant torque load, at 500 r.p.m., the field turns are divided into two groups connected in series. If the field turns are connected in parallel, then speed will be
- The full-scale deflection current of a meter is 1 mA and its internal resistance is 100 $ \Omega$. This meter is to have full deflection when 100 V is measured. What is the value of series resistor to be used?
- A transmission line having a surge impedance of $400 \Omega$ is connected with a cable which has surge impedance of $40 \Omega$. A surge magnitude of $100$ kV is travelling from the transmission line towards the cable. The transmitted voltage will be
- A transmission line having a surge impedance of $400 \Omega$ is connected with a cable which has surge impedance of $40 \Omega$. A surge magnitude of $100 \text{ kV}$ is travelling from the transmission line towards the cable. The transmitted voltage will be
- A two-winding 220 V/110 V, 1.5 kVA transformer is reconnected as a 220 V/330 V auto- transformer. It is rerated as
- The power is transmitted through a transmission line of impedance (r+jx) at equal voltage at both ends. The maximum power can be transferred under the steady-state condition if
- To test the insulator against HV surges caused by lightning, the test normally adopted is
- Which of the following specifications is not correct for a common-collector amplifier?