A piston–cylinder device initially contains 0.4 m³ of air at 100 kPa and 127° C. The air is now heated to 177°C in such a way that the pressure inside the cylinder remains constant. The work done during this process is ______.
Asked in GPSC Assistant Regional Transport Officer / Assistant Director of Transport, Class-2, Ports and Transport Department 2025
Show answer
Answer: B. 5 kW
More GPSC Prelims previous year questions questions
- An ideal gas undergoes a constant temperature (isothermal) process in a closed system. The heat transfer and work are ______ respectively.
- Air at 30°C and 4 atm is throttled by a valve to 1 atm. If the valve is adiabatic and the change in kinetic energy is negligible, then the exit temperature of air will be ______.
- The ideal Ericsson cycle consists of ______.
- Thermal efficiency of the Otto cycle can be increased by ______ due to carbon deposition on piston face.
- An ideal Otto cycle with a specified compression ratio is executed using (a) air, (b) argon and (c) ethane as the working fluid. For which case will the thermal efficiency be the highest?
- Consider the ideal Ericsson, Stirling and Carnot cycles operating between the same temperature limits. Which one of these cycles will be more efficient?
- What is drawn in the cylinder of the petrol engine during the Suction Stroke?
- Each tire is designated by a group of numbers and letters like 175/65 R 14 82 T. What is the meaning of 65 in the above tire number?