A rigid tank contains 6 kg of an ideal gas at 300 kPa and 40°C. Now a valve is opened and half of mass of the gas is allowed to escape. If the final pressure in the tank is 220 kPa, then the final temperature in the tank is ______.
Asked in GPSC Assistant Regional Transport Officer / Assistant Director of Transport, Class-2, Ports and Transport Department 2025
Show answer
Answer: A. 186°C
More GPSC Prelims previous year questions questions
- Water is boiled in a pan on a stove at sea level. During 10 min of boiling, it is observed that 200 g of water has evaporated. Then the rate of heat transfer to the water is ______. (Assume h_fg = 2257 kJ/kg)
- The change in specific heat with respect to temperature is zero in case of ______.
- In which medium does a sound wave travel faster in air at 30°C and 2 atm or in air at 40°C and 2 atm?
- A candle is burning in a well-insulated room. Considering the room (including the air plus the candle) as the system, the internal energy of the system will ______.
- The specific gravity of a fluid is specified to be 1. The specific volume of this fluid is ______. (Assume the density of water as 1000 kg/m³)
- Heat is transferred steadily through a 0.2 m thick of 8 m × 4 m wall at a rate of 2.4 kW. The inner and outer surface temperatures of the wall are measured to be 15°C and 5°C. The average thermal conductivity of the wall is ______.
- The boiling temperature of water in a 10 cm deep pan ______ the boiling temperature in a 50 cm deep pan.
- A rigid tank whose volume is unknown is divided into two parts by a partition. One side of the tank contains an ideal gas at 927°C. The other side is evacuated and has a volume twice the size of the part containing the gas. The partition is now removed and the gas expands to fill the entire tank. Heat is now applied to the gas until the pressure equals the initial pressure. The final temperature of the gas is ______.