A short column of external diameter ‘D’ and internal diameter ‘d’ carries an eccentric load ‘W’. The greatest eccentricity which the load can have without producing tension on the cross-section of the column would be
Asked in HPSC to Final Answer Key of the Master Question Booklet of the Screening Test for the Posts of Assistant Engineer (Civil) in Irrigation Department
Show answer
Answer: C. (D² + d²) / (8D)
More HPSC Prelims previous year questions questions
- In the Euler’s formula for buckling load, PE = n , the value of factor ‘n’ is least in case of a column with
- An elastic body, having poisson’s ratio ‘µ’, is subjected to a direct compressive stress σx in the longitudinal direction. If the lateral strains in the other two directions are prevented by applying σy and σz in those directions, then σy = σz is equal to
- A beam has a solid circular cross-section having diameter ‘d’. If a section of the beam is subjected to a shear force ‘F’, the maximum shear stress in the cross-section is given by
- For three hinged Parabolic arch of uniform cross-section with span ‘L’ central rise ‘h’ subjected to uniformly distributed load ‘w’ per meter on left half span, the horizontal reaction at support is given by
- When there is a reduction in amplitude over every cycle of vibration then the body is said to have
- As per IS:456-2000, the approximate value of shrinkage strain in concrete is
- In doubly reinforced section, stress in steel in compression is normally –
- In a simply supported slab, alternate bars are curtailed at approximately –