A tank rests on a soil with a unit weight of 19 kN/m3. Calculate the pre construction stress in the soil at a depth of 5 m. Water table lies 2m below the ground level. Assume unit weight of water as 10 kN/m3.
Asked in TNPSC Town and Country Planning (Subject Code 382)
Answer under review: our editors are checking this question. Try the other TNPSC Prelims previous year questions questions meanwhile.
More TNPSC Prelims previous year questions questions
- The percentage of fines in a soil sample is 3 %. The gradation analysis results yield coefficient of uniformity is 7.5 and coefficient of curvature is 1.5. The soil is classified as ________ based on Indian Standard Classification System.
- The value of pore pressure, at failure for saturated clay is
- The co-efficient of compression of a normally-consolidated clay soil with a liquid limit of 50 is
- The minimum test duration for a plate load test is
- Soil samples are to be retrieved from a clayey sand stratum which is susceptible to caving from a depth of 10 m below the ground level. Suggest a suitable method for advancing bore hole to retrieve the sample
- A soil has an angle of internal friction of 38° and is well packed. On application of foundation load, the soil will fail by
- The total pressure on an immersed surface inclined at an angle θ with the liquid surface is
- The thickness of boundary layer in a laminar flow is
All 17,524 TNPSC Prelims previous year questions questions →