- Static friction is the force that opposes the start of motion between two surfaces in contact. It is generally the maximum friction force. - Kinetic friction (or sliding friction) is the force that opposes the relative motion between two surfaces that are already sliding over each other. It is typically less than the maximum static friction. - Rolling friction is the force that opposes the rolling motion of a wheel or ball over a surface. It is generally significantly less than kinetic or static friction for comparable loads and surfaces, which is why rolling is much easier than sliding.
A uniform meter scale of mass 0.24 kg is made of steel. It is kept on two wedges, W₁ and W₂, in a horizontal position. W₁ is at a distance of 0.2 m from one of its ends, while W₂ is at distance of 0.4 m from the other end. If the force on the scale is N₁ due to W₁ and N₂ due to W₂, then : (take g = 10.0 m s⁻²) Ans: C For a uniform meter scale of mass 0.24 kg, its of mass, which is at the 0.5 m mark from either end. W₁ is at 0.2 m from one end (say, the 0m mark), and W₂ is at 0.4 m from the other end (the 1m mark), For equilibrium, the sum of upward forces equals the sum of downward forces (N₁ + N₂ = W = 2.4 N), and the sum of torques about any point is zero. Taking torques about the point W₁ (at 0.2m), the weight W (at 0.5m) creates a clockwise torque W = N₂ 0.4 Nm. Setting the sum of torques to zero: N. Substituting N₂ into the force equation: N₁ + 1.8 330. Which one of the following about different frictional forces is correct?
Asked in UPSC NDA 1 2024 · Topic: Mechanics (Newton's Laws of Motion and their applications)
Show answer
Answer: C. Static friction > Kinetic friction > Rolling fric‐ tion
More Physics questions
- If the block P as shown in the figure below were to be at rest, what should the magnitude of force F be ?
- A block of mass 2 kg, moving with the initial speed of 3 m/s comes to rest on a rough horizontal surface after travelling a distance of 3 m. The magnitude of the frictional force is :
- A brass ball is tied to a thin wire and swung so as to move uniformly in a horizontal circle. Which of the following statements in this regard is / are true? 1. The ball moves with constant velocity 2. The ball moves with constant speed 3. The ball moves with constant acceleration 4. The magnitude of the acceleration of the ball is constant Select the correct answer using the code given below:
- Which one of the following statements is not correct?
- The following figure represents the velocity-time graph of a moving car on a road: Which segment of the graph represents the retardation?
- A man is sitting in a train which is moving with a velocity of 60 km/hour. His speed with respect to the train is:
- Two forces, one of 3 newton and another of 4 newton are applied on a standard 1 kg body, placed on a horizontal and frictionless surface, simultaneously along the x-axis and the y-axis, respectively, as shown below: The magnitude of the resultant acceleration is:
- Which one of the following is not a contact force ?