If the sides of a slab simply supported on edges and spanning in two directions are equal, the maximum bending moment is multiplied by
Answer under review: our editors are checking this question. Try the other Rcc structures design questions meanwhile.
More Rcc structures design questions
- A T-beam behaves as a rectangular beam of a width equal to its flange if its neutral axis
- An R.C.C. beam of 6 m span is 30 cm wide and has a lever arm of 55 cm. If it carries a U.D.L. of 12 t per m and allowable shear stress is 5 kg/cm2, the beam
- A pre-stressed rectangular beam which carries two concentrated loads W at $$\frac{{\text{L}}}{3}$$ from either end, is provided with a bent tendon with tension P such that central one-third portion of the tendon remains parallel to the longitudinal axis, the maximum dip h is
- According to I.S. : 456, slabs which span in two directions with corners held down, are assumed to be divided in each direction into middle strips and edge strips such that the width of the middle strip, is
- If the permissible compressive stress for a concrete in bending is C kg/m2, the modular ratio is
- In a combined footing for two columns carrying unequal loads, the maximum hogging bending moment occurs at
- On piles, the drop must be at least
- If a bent tendon is required to balance a concentrated load W at the centre of the span L, the central dip h must be at least