In Marshall Method of mix design, the cylindrical mould used has dimensions:
Asked in HPSC to Final Answer Key of the Master Question Booklet of the Screening Test for the Posts of Assistant Engineer (Civil) in Irrigation Department
Show answer
Answer: A. 10.16 cm diameter and 6.35 cm height
More HPSC Prelims previous year questions questions
- A falling gradient followed by a rising gradient is known as:
- For a curved railway track having radius of curve R = 1750 m; actual cant provided C_a = 50 mm and permissible cant deficiency C_d = 100 mm, the safe speed on this curve is
- The Passenger Car Unit (PCU) value is not affected by
- A runway having length of 2100 m in standard conditions, is to be provided at 410 m above Mean Sea Level ( MSL). What will be the corrected length of runway?
- The corner stress in rigid pavement slab, using Kelley’s formula for the pavement data given P = 5100 kg, h = 18 cm, a = 15 cm, l = 70.6 cm; is
- How many levels of service for a roadway have been suggested by The Highway Capacity Manual ( HCM) as well as IRC
- The design traffic, in terms of the cumulative number of standard axles for following data is: Data: Initial traffic = 3800 CV, Traffic Growth Rate = 6 %, Vehicle Damage Factor = 3.20, Lane distribution Factor = 0.75, design life of pavement = 20 years.
- A rectangular block of wood was measured with a 5-m tape. The tape was found to be 0.01 m too long. If the volume calculated by measurement was 2.8 m³, the actual volume will be