In VMC machine command G 81 X 25.0 Y 15.0 Z-10.0 R2.0, F100 “R” represent
Asked in TNPSC TRADE ADVANCED COMPUTER NUMERICAL CONTROL MACHINING TECHNICIAN (Subject Code 534)
Answer under review: our editors are checking this question. Try the other TNPSC Prelims previous year questions questions meanwhile.
More TNPSC Prelims previous year questions questions
- If the spindle speed changes during VMC machining with G94 active, what happens to the feed motion.
- __________ mode allow to manually run a single line of G-code.
- __________ mode allows the operator to move machine axis manually for set up.
- During CNC rough milling, the depth of cut is set to 2 mm. If the feed rate is 120 mm/min and spindle speed is 200 rpm, Calculate the feed per tooth for a 3-tooth cutter.
- Long running the tool tip may wear out and dimension of the work piece may vary from the original size is rectify by
- Match the tool problems with their remedies :
- If the diameter increase, the speed should be
- The speed at which the cutting edge passes over the material and it is expressed in metres per min is
All 17,524 TNPSC Prelims previous year questions questions →