______ is used to slightly enlarge a hole for better tolerance and surface finish.
Asked in GPSC Assistant Regional Transport Officer / Assistant Director of Transport, Class-2, Ports and Transport Department 2025
Show answer
Answer: B. Reaming
More GPSC Prelims previous year questions questions
- The lighter and heavier impurities present in the liquid metal can be segregated during the filling of the mold cavity by ______.
- A rolling process was done using a roller of diameter 200 mm. The friction coefficient between the roller surface and the material to be rolled is 0.10. The maximum draft was ______.
- In an extrusion process, a rod with 2 mm diameter was extruded from a rod with an initial diameter of 20 mm. The extrusion ratio was ______.
- The friction force changes its direction in ______.
- The pipe defect is more frequent in the forming process ______.
- The sheared part from a metal sheet becomes product in sheet metal operation. This is known as ______.
- In the extrusion of metal, the ram force ______ with increase in die angle.
- The temperature of the inner core of the neutral flame in oxyacetylene gas welding is ______.