Ques #: 4 In plastic analysis of steel structures, at the location of plastic hinge:- 1) Curvature is zero 2) Curvature is infinite 3) Moment is infinite 4) Moment is zero
Asked in RPSC 23Feb 2016Question Paper for VicePrincipal/Superintendent ITI Screening Test 2012(Civil Engineering)VICE PRINCIPAL/SUPDT. ITI - 2012
Show answer
Answer: B. Curvature is infinite
More RPSC Prelims previous year questions questions
- The Indian Standard code used for Wind load analysis is:- 1) Is 875 part -1 2) Is 875 part-2 3) Is 875 part-3 4) IS875 part -4
- Ques #: 6 Effective length of a compression member of length L and Having both ends fixed, is :- 1) 0.80 L 2) L 3) 0.65 L 4) 2L
- Ques #: 7 SI unit of kinematic viscosity is :- 1) N.s/m² 2) m²/s 3) N/m 4) N.s/m
- Ques #: 8 Surface tension of water :- 1) Increases with increase in temperature 2) Decreases with increase in temperature 3) Independent of temperature 4) None of the above is correct
- Ques #: 9 If f = friction coefficient for a pipe; Land D are length and diameter for the pipe respectively and V is velocity of flow through the pipe then according to Darcy-Weisbach equation the head loss due to friction resistance (hī) is given by :- 1) fLv²/gD 2) 2fLv²/gD 3) fLv²/2gD 4) 3fLv²/4gD
- Ques #: 10 If V =mean velocity ;R=Hydraulic radius; S = bottom slop of channel and n=Manning's coefficient then Manning's formula for channel flow is given by :- 1) V={(R1/3 S1/2)/n 2) V={(R1/2 S2/3)/n 3) V={(R2/3 S1/2)/n 4) V={(R1/2 S1/3)/n
- Ques #: 11 A rectangular channel section will be most efficient when:- 1) Hydraulic radius is equal to half the depth of flow 2) Hydraulic radius is equal to the depth of flow 3) Depth of flow is equal to the bottom width 4) Depth of flow is equal to half the hydraulic radius
- Ques #: 12 The position of base course in a flexible pavement is :- 1) Below the sub-base 2) Over the sub-base 3) Over the sub-grade but below sub-base 4) Over the wearing course when renewal of surface is needed