Ques # : 6 The JFET can operate in 1) depletion mode only 2) enhancement mode only 3) either depletion or enhancement mode at a time 4) both depletion or enhancement modes simultaneously
Asked in RPSC Vice Principal/Superintendent ITI Screening Test 2012 VPITI-Electronic-and-Communications
Show answer
Answer: A. depletion mode only
More RPSC Prelims previous year questions questions
- Ques # : 7 The following constitutes an active circuit element 1) FET 2) BJT 3) Diode 4) a current source
- Ques # : 8 In the fabrication of a buried layer n-p-n transistor, the processes involved are 1. diffusion 2. oxidation 3. epitaxy 4. lithography The correct sequence in which these processes are to carried out, is 1) 2, 4, 3, 1 2) 4) 2, 1, 3 3) 2) 4, 1, 3 4) 4, 2, 3, 1
- Ques # : 9 The output current versus input voltage transfer characteristic of an n-channel JFET is such that there is 1) zero current flow at zero input voltage bias 2) current flow only when a positive input threshold voltage is crossed. 3) current flow only when a negative input cut-off voltage bias is crossed. 4) no cut-off input voltage
- Ques # : 10 An SCR triggered by a current pulse through its gate can be turned off by 1) giving another pulse of the same polarity to the gate 2) by giving pulse to the cathode 3) by giving pulse to the anode 4) by reversing the polarity of anode and cathode voltage
- Ques # : 11 An operational amplifier is a 1) high gain CE amplifier 2) cascaded CE amplifier 3) high gain direct coupled amplifier 4) high gain CB amplifier
- Ques # : 12 Gain of an Op Amp inverting amplifier with an input of 0.25 V and output of 17.5 V is 1) 4.375 2) 17.75 3) 17.25 4) 70
- Ques # : 13 MOS transistor 1) has only one p-n junction 2) conduct when sufficient voltage is applied to gate electrode 3) has only two electrodes 4) has gate electrode in direct contact with the silicon
- Ques #:14 Consider the following circuit configurations 1. Common emitter 2. Common base 3. Emitter follower 4.Emitter follower using Darlington pair. The correct sequence in increasing order of the input resistances of these configuration is 1) 2, 1, 4, 3 2) 1, 2, 4, 3 3) 2, 1, 3, 4 4) 1, 2, 3, 4