Ques #:85 The address resolution protocol (ARP) is used for :- 1) Finding the IP address from the DNS 2) Finding the IP address of the default gateway 3) Finding the IP address that corresponds to a MAC address 4) Finding the MAC address that corresponds to an IP address
Asked in RPSC 23Feb 2016Question Paper for VicePrincipal/Superintendent ITI Screening Test 2012(Computer Science)VICE PRINCIPAL/SUPDT. ITI - 2012
Show answer
Answer: D. Finding the MAC address that corresponds to an IP address
More RPSC Prelims previous year questions questions
- Ques #:86 In a network of LANs connected by bridges, packets are sent from one LAN to another through intermediate bridges. Since more than one path may exist between two LANs, packets may have to be routed through multiple bridges. Why is the spanning tree algorithm used for bridge-routing? 1) For shortest path routing between LANs 2) For avoiding loops in the routing paths 3) For fault tolerance 4) For minimizing collisions
- Ques #:87 Ethernet when Manchester encoding is used, the bit rate is: 1) Half the baud rate 2) Twice the baud rate 3) Same as the baud rate 4) None of these
- Ques #:88 Consider the following IP address with corresponding subnet Mask : IP address = 172.60.48.20 Subnet Mask = 255.255.224.0 Find the range of assigned IP address on the subnet on which the host belongs ? 1) 172.60.32.0 – 172.60.63.255 2) 172.60.32.1 – 172.60.64.255 3) 172.60.32.1 – 172.60.63.254 4) 172.60.32.0 – 172.60.64.254
- Ques #:89 Consider the network with subnet mask 152.208.0.0/13. Determine the address of the last host in this network:- 1) 152.223.255.254 2) 152.215.254.254 3) 152.215.255.255 4) 152.215.255.254
- Ques #:90 A file of size 2000KB is to be sent from station A to station B through a link. The RTT is 200ms and size of packet is 1KB. Link bandwidth is infinite which implies that the transit time of a packet is nearly zero. Initially 3xRTT time is taken for “handshaking” before data is sent. Packets are sent in a special way, like one packet is sent during the first RTT, two packets are sent during the second RTT, four packets are sent during the third RTT and so on. What will be the total time required to transfer the file? 1) 2.4s 2) 2.5s 3) 2.6s 4) 2.7s
- Ques #: 92 HTML stands for :- 1) Hyper Text Markup Language 2) Hyper Text Makeup Language 3) Hide Text Markup Language 4) None of these
- Ques #: 95 XPATH used :- 1) To address your document by specifying a lotion path 2) To address the server 3) To store the IP address of the server 4) None of these
- Ques #: 97 Can XML be used as a database:- 1) Yes, it can be 2) No, it can't be 3) XML is not a database, it is a language 4) None of these