Ques # :91 What is the SNR improvement with FSK over ASK in most types of noise environment ? 1) 200 to 300 dB 2) 3 to 4 dB 3) 10 to 12 dB 4) 0 dB
Asked in RPSC Vice Principal/Superintendent ITI Screening Test 2012 VPITI-Electronic-and-Communications
Show answer
Answer: B. 3 to 4 dB
More RPSC Prelims previous year questions questions
- Ques # :92 Consider minimum shift keying (MSK) also known as fast FSK with frequency spacing 2 f_d between the state frequencies. r_b is the data rate. Which one of the following correctly relates r_b and f_d ? 1) f_d = r_b/4 2) f_d = r_b / 2 3) f_d = 3r_b/4 4) f_d = r_b
- Ques # :94 The bandwidth of an n-bit binary coded PCM signal for an original signal bandwidth of B Hz is 1) B Hz 2) n B Hz 3) B/n Hz 4) n^2 B Hz
- Ques # :95 In a PCM system each quantization level is encoded into 8 bits. The signal to quantization noise ratio is equal to 1) (1/12 (1/256))^2 2) 48dB 3) 64 dB 4) 256 dB
- Ques # :96 Which of the following pulse modulation is analog ? 1) PCM 2) Differential PCM 3) PWM 4) Delta
- Ques # :98 In free space line of sight propagation case, the transmission losses between transmitter and receiver increase with frequency (f) as 1) f 2) f^2 3) f^4 4) f^1/2
- Ques # :99 In a cellular communications system, path loss between transmitter and receiver is due to 1) scattering from building, trees, vehicles, and other structures only. 2) scattering from building, trees, vehicles, and other structures and due to reflections from ground only 3) scattering from building, trees, vehicles, and other structures and due to reflections from ground along with reflections from ionosphere only. 4) scattering from building, trees, vehicles, and other structures and due to reflections from ground along with reflections from ionosphere along with loss due to surface wave phenomenon.
- Ques # :100 Match List I with List II and select the correct answer using the codes given below the list : List I A. Television B. Radio C. Radar D. Data communication List II 1. Either AM or FM used 2. Both AM and FM are used 3. PCM is used 4. Digital system 1) A(2) B(1) C (1) D (2) 2) A(2) B(1) C (3) D (4) 3) A(4) B(1) C (3) D (2) 4) A(2) B(3) C (1) D (4)
- Full adder can be implemented by using :-