Series capacitive compensation primarily enhances system stability in EHV transmission lines.
Series capacitive compensation in EHV transmission lines is used to
Asked in GS&EI ElectEngg 14 2024 1601 2025 · Topic: Electric Current (Electromotive Force (EMF) and internal resistance of a cell)
More Physics questions
- The line constants of a 200 km, 3-$\phi$, 50 Hz transmission line are given as following : $A \angle 90^{\circ} \text{ S}/\text{phase}$ The sending-end voltage is 230 kV. The value of the line charging current, when the load is disconnected, will be
- The line constants of a 200 km, 3-φ, 50 Hz transmission line are given as following : A = D 0.001 ∠90° S/phase The sending-end voltage is 230 kV. The value of the line charging current, when the load is disconnected, will be
- A copper wire of radius r and length 1 has a resistance of R. A second copper wire with radius 2r and length 1 is taken and the two wires are joined in a parallel combination. The resultant resistance of the parallel combination of the two wires will be
- A wire of copper having length l and area of cross-section A is taken and a current I is flown through it. The power dissipated in the wire is P. If we take an aluminum wire having same dimensions and pass the same current through it, the power dissipated will be
- An electric circuit is consisting of a cell, an ammeter and a nichrome wire of length l. If the length of the wire is reduced to half (l/2), then the ammeter reading
- A metallic wire having length *l* and area of cross-section A has a resistance R. It is now connected in series with a wire of same metal but with length 2*l* and area of cross-section 2A. The total resistance of the combination will be:
- Consider a copper wire of length 1m and area of cross-section 1mm². Given the resistivity of the copper is 1.7 × 10⁻⁶ Ω cm. What is the resistance of this wire?
- Which one of the following physical quantities does NOT affect the resistance of a cylindrical resistor ?