The displacement of joints is selected as redundant in which method of structural analysis ?

Asked in Local Self Government Dept. Exam 2022 · Topic: Mechanics (Elasticity (Stress, Strain, Hooke's Law, Elastic Moduli))

1. Force method
2. Stiffness method
3. Flexibility method
4. Compatibility method

More Physics questions

• What is the maximum length of open gantries beyond which expansion joint shall be provided ?
• If M25 grade concrete is used as a bedding material for a steel column, then the maximum bearing pressure shall be limited to
• What is the ratio of most unfavourable slenderness of each member between the intermediate weld connection of two channel section connected back to back if the most unfavourable ratio of slenderness of the member as a whole is 90 ?
• When transverse stiffeners are provided in plate girder is connected along one longitudinal edge only then the minimum thickness of web shall be taken as - (1) $\frac{d}{200 \varepsilon_{w}}$ - (2) $\frac{d}{340 \varepsilon_{w}}$ - (3) $\frac{d}{90 \varepsilon_{w}}$ - (4) $\frac{d} {400 \varepsilon_{w}}$
• What is the minimum vertical distance between the rows of bars if the beam is constructed with 20 mm size aggregate and reinforced with 12 mm diameter bars ?
• If 300 mm $\times$ 600 mm rectangular beam cast with M25 grade concrete is subjected to flexure, then the moment of the beam is
• What is the depth of rectangular portion in stress block diagram of concrete? - (1) $\frac{4} {7} X_{u}$ - (2) $\frac{3}{7} X_{u}$ - (3) $ \frac{2}{7} X_{u}$ - (4) $\frac{5}{7} X_{u}$
• The nominal shear stress should not exceed __________ for solid slab constructed with M40 grade concrete.

All 2,629 Physics questions →