The load transferred through skin friction ,Qs (kN) in a R.C. Pile of length and diameter of 20 m and 0.5m respectively embedded in cohesive bed (Cu=50kPa, α=0.7) is
Asked in HPSC to Final Answer Key of the Master Question Booklet of the Screening Test for the Posts of Assistant Engineer (Civil) in Irrigation Department
Show answer
Answer: A. 1099.55
More HPSC Prelims previous year questions questions
- In a cohesionless ground, the Standard Penetration Test number at 2.0 m depth from ground surface was found to be 12. The unit weight of the ground was 20 kN/m³ . The corrected Standard Penetration Test number after applying overburden correction is nearly
- In a cohesionless ground, a plate load test was carried out on a plate size of 30 cmx 30 cm and the ultimate bearing capacity of the ground was found to be 100 kPa. The ultimate bearing capacity of a footing of size 2m x 2 m on the same ground in kPa will be
- The coefficient of volume compressibility, mv and the coefficient of permeability ,k of a saturated clayey ground are 3x10⁻³ m²/kN and 1x10⁻⁸ m/sec respectively. The coefficient of consolidation, Cv in m2/sec is
- The flow velocity of water through the saturated soil mass will remain laminar if its Reynolds's number is
- The critical state of flow in a non-rectangular channel (Q is discharge, A is wetted area of flow, T is top width of flow) is expressed by
- The mild slope profile M 2 occurs for depth
- Water is flowing through a pipe at the end of which a nozzle is fitted. The diameter of nozzle is 100 mm and the head of water at the centre of nozzle is 100 m. The coefficient of velocity is 0.95 and mass density of water ρ = 1000 kg/m³ . The force exerted by the jet of water on a fixed vertical plate is
- The elementary profile of a gravity dam is