The surface area of 3240 m² of setting tank is used for design discharge of 1.5 m³/sec. What is the design overflow rate for tank?
Asked in APPSC (Arunachal) Question Booklet (Set-A) of Paper I and Paper II 2026
Show answer
Answer: B. 20 m³/m²/day
More APPSC Prelims previous year questions questions
- The trapezoidal open channel has a bottom width of 3 m and side slope of 1.5H : 1 V. The longitudinal slope of the channel is 0.0004. The uniform flow depth and the velocity of flow are 1.25 m and 1.45 m/s respectively. The Manning's roughness coefficient for the channel is
- In the design of lacing system for a built-up steel column, the maximum allowable slenderness ratio of lacing bar is
- Assertion (A) : In masonry structures limiting value of slenderness ratio for a column is less than that of a wall. Reason (R) : A column made out of brick masonry can buckle around either of the two horizontal axes while a wall can buckle around only one axis.
- Design tensile strength of tension member is given by
- In limit state method, characteristic strength of concrete is
- Which of the following formations does not contain any groundwater?
- As per IS 800-2007, the partial safety factors for dead load and live load for a roof truss as per limit state of serviceability are respectively
- The percentage of elongation of mild steel (E250 A Grade) of rolled shape is about ____ as per IS 2062.