The phenomenon in a rapid sand filter where dissolved gases come out of solution due to negative pressure, forming bubbles that stick to the sand grains and stop the filter's operation is known as
Asked in GPSC Gujarat Engineering Service (Civil), Class-1 and Class-2 2026
Answer under review: our editors are checking this question. Try the other GPSC Prelims previous year questions questions meanwhile.
More GPSC Prelims previous year questions questions
- Which sequence represents the correct order of conventional surface water treatment units from raw water inlet to finished water outlet?
- Which of the following conditions most directly improves anaerobic sludge digestion performance?
- An aeration basin of volume 400 m3 contains mixed liquor suspended solids (MLSS) of 1500 mg/L. The amount of mixed liquor suspended solids (MLSS) in the tank is
- A wastewater sample has high COD but relatively low BOD. Which of the following is the most reasonable interpretation?
- Which of the following best distinguishes domestic wastewater from many industrial wastewaters in terms of characteristics?
- One litre of sewage gives sludge volume of 40 cm³ after 30 minutes settling. If dry solids = 4.0 g, the sludge volume index (SVI) is
- A grit chamber of dimensions 15 m × 2.0 m × 0.6 m carries a flow of 540 m3/h. The detention time is approximately
- In a conventional activated sludge process, if the return activated sludge (RAS) is not provided, the most likely consequence would be