Which sequence represents the correct order of conventional surface water treatment units from raw water inlet to finished water outlet?
Asked in GPSC Gujarat Engineering Service (Civil), Class-1 and Class-2 2026
Answer under review: our editors are checking this question. Try the other GPSC Prelims previous year questions questions meanwhile.
More GPSC Prelims previous year questions questions
- Which of the following conditions most directly improves anaerobic sludge digestion performance?
- An aeration basin of volume 400 m3 contains mixed liquor suspended solids (MLSS) of 1500 mg/L. The amount of mixed liquor suspended solids (MLSS) in the tank is
- A wastewater sample has high COD but relatively low BOD. Which of the following is the most reasonable interpretation?
- Which of the following best distinguishes domestic wastewater from many industrial wastewaters in terms of characteristics?
- One litre of sewage gives sludge volume of 40 cm³ after 30 minutes settling. If dry solids = 4.0 g, the sludge volume index (SVI) is
- A grit chamber of dimensions 15 m × 2.0 m × 0.6 m carries a flow of 540 m3/h. The detention time is approximately
- In a conventional activated sludge process, if the return activated sludge (RAS) is not provided, the most likely consequence would be
- Which of the following combinations most strongly suggests that a wastewater is difficult to treat by conventional biological process alone?