The main purpose of providing a sill band is to
Asked in GPSC Gujarat Engineering Service (Civil), Class-1 and Class-2 2026
Answer under review: our editors are checking this question. Try the other GPSC Prelims previous year questions questions meanwhile.
More GPSC Prelims previous year questions questions
- A plane frame has 3 members, 4 joints and is supported by 6 external reaction components (e.g., fixed supports at both bases). It contains one internal shear release (which removes 1 constraint – it allows relative shear displacement but transfers axial force and moment). The degree of static indeterminacy of the frame is
- For a column with a non-symmetrical cross-section subjected to axial compression, the slenderness ratio governing buckling is based on
- A solid circular shaft of diameter 40 mm is subjected to a torque of 1 kNm. The maximum shear stress (in MPa) is
- Who developed the Moment Distribution Method?
- A tension member of IS 800:2007 is made of a single angle ISA 75 × 75 × 6 mm (area = 866 mm2) with one leg connected to a gusset plate by 2 bolts of 16 mm diameter. Gross diameter of bolt hole = 18 mm. The net effective area (in mm2) as per the limit state method is
- A three-hinged parabolic arch of span 20 m and rise 5 m carries a point load of 80 kN at 5 m from left support. The horizontal thrust (in kN) is
- A simply supported steel beam of span 6 m carries a uniformly distributed load of 20 kN/m (factored). The steel yield strength fy = 250 MPa. Using the limit state method as per IS 800:2007, the required plastic section modulus (in cm3) is
- A short column of size 300 mm × 300 mm is subjected to an axial factored load of 1200 kN. Using M20 concrete and Fe415 steel, the minimum area of longitudinal reinforcement (in mm2) as per IS 456 is