Consider the following statements regarding chaplets used in casting: Statement I: The main objective of chaplets is to impart good alignment of mould and core surfaces and to achieve directional solidification. Statement II: The chaplets are generally made of parent metal of which the casting is. Statement III: When the molten metal is poured in the mould cavity, the chaplet melts and fuses itself along with molten metal during solidification and thus forms a part of the cast material. Which of the above statements are correct?
Asked in GPSC Graduate Engineer Trainee, Class-2, Gujarat Maritime Board (GMB) 2026
Show answer
Answer: B. II and III only
More GPSC Prelims previous year questions questions
- A specimen of 100 mm length is machined on a shaper using a tool with a 15° rake angle. The uncut chip thickness is 1.5 mm and the chip length obtained is 40 mm. The shear plane angle is approximately
- For orthogonal metal cutting, the chip velocity (Vc ) and shear velocity (Vs ) in terms of cutting velocity V, rake angle (α) and shear angle (ϕ) is given by
- A cutting tool operates at a cutting speed of 160 m/min and gives a tool life of 5 minutes. The Taylor's tool life constant is 229. The value of the tool life exponent is approximately
- Consider the following statements regarding Numerical Control (NC): Statement I: NC machines resulting in shorter cycle times as compared with manually operated machine tools. Statement II: NC machines reduce manufacturing lead time than manually operated machine tools. Statement III: The first widely used part programming language for NC machines was APT (Automatically Programmed Tooling). Statement IV: The only disadvantage is that NC machines generally require more complex fixturing than conventional machine tools. Which of the above statements are correct?
- Consider the following statements regarding ABC Analysis: Statement I: A type of items, approximately are about 10 % in number and account for around 75 % of the annual inventory usage value. Statement II: B type of items, approximately are about 20 % in number and account for around 15 % of the annual inventory usage value. Statement III: C type of items, approximately are about 70 % in number and account for around 10 % of the annual inventory usage value. Which of the above statements are correct?
- Consider the following statements regarding the EOQ model for an item having annual demand of 3000 units, the ordering cost as 100 rupees per order and holding cost as 2.40 rupees per unit per year: Statement I: The Economic Order Quantity (EOQ) is 500 units. Statement II: The optimum number of orders per year is 6. Statement III: The time between two consecutive orders is approximately 04 months. Which of the above statements are correct?
- Consider the following statements regarding CPM: Statement I: CPM is used for repetitive jobs. Statement II: CPM is deterministic model. Statement III: CPM incorporates statistical analysis. Statement IV: CPM is said to be event-oriented. Which of the above statements are correct?
- Consider the following statements regarding float in project management analysis: Statement I: Total float is the maximum time an activity can be delayed without delaying the overall project completion. Statement II: Free float is the amount of time, an activity can be manipulated without affecting the float of subsequent activities. Statement III: Free float is always greater than or equal to total float. Statement IV: Activities on the critical path have zero total float. Which of the above statements are correct?