Resistance of a uniform wire is directly proportional to its length. Resistors in parallel combine such that the reciprocal of the equivalent resistance is the sum of the reciprocals of individual resistances.
A piece of wire of resistance R is cut into three equal parts. These parts are then connected in parallel. If the equivalent resistance of this combination is R₁, then the ratio R/R₁ is
Asked in WBCS Main Paper 4 2021 · Topic: Electric Current (Series and parallel combination of resistors)
More Physics questions
- A wire of resistance R Ω is cut into ten equal parts, which are then joined in parallel. The new resistance is
- How two identical bulbs should be connected to get maximum light? - (1) Both are connected in series - (2) Both are connected in parallel Select the correct answer using the code given below - Code -
- The full-scale deflection current of a meter is 1 mA and its internal resistance is 100 Ω. This meter is to have full deflection when 100 V is measured. What is the value of series resistor to be used?
- A 6-pole lap wound DC machine has an armature resistance of 0.06 Ω. If the machine is rewound for wave winding, then its armature resistance is
- The line constants of a $200$ km, 3- $\phi$, $50$ Hz transmission line are given as following : $A = D = 0 \cdot 938 \angle 1 \cdot 2^\circ$ $B = 131 \cdot 2 \angle 72 \cdot 3^\circ \Omega/ $phase $C = 0 \cdot 001 \angle 90^\circ$ S/phase The sending-end voltage is $230$ kV. The value of the line charging current, when the load is disconnected, will be - $132 \cdot 8$ kA - $100 \cdot 5$ kA - $141 \cdot 5$ A
- Which of the following statements are incorrect? 1. LED lamps do not contain mercury 2. LED lights never fail abruptly, but there is a gradual decrease in the output 3. CFL lamps are more energy-efficient as compared to the LED lamps
- Which cells use the sunlight to make electricity?
- Which one of the following is the best shape of a solid metal rod to form the top end of a lightning conductor ?