A Wheatstone bridge requires a change of 6 Ω in the unknown arm of the bridge to produce a change in deflection of 3 mm of the galvanometer. The sensitivity of the instrument is (A) 0-5% (B) 2% (C) 0-5 mm/Ω (D) 2-0 Ω/mm
Asked in APSC INSTRUMENTATION
Answer under review: our editors are checking this question. Try the other APSC Prelims previous year questions questions meanwhile.
More APSC Prelims previous year questions questions
- In the inferential type of flow-measuring methods, the flow rate is inferred from the characteristic effect of a related phenomenon. The inferential types of flow meters are (A) variable head or differential meters (B) variable area meters (C) turbine meters (D) All of the above
- In the inline rotating torque sensor, the strain gauges are kept on the shaft precisely at (A) 90° to the shaft axis (B) 30° to the shaft axis (C) 60° to the shaft axis (D) 45° to the shaft axis
- A message signal contains three frequencies 5 kHz, 10 kHz and 20 kHz respectively. The bandwidth of the AM (amplitude modulated) signal is (A) 40 kHz (B) 30 kHz (C) 20 kHz (D) 10 kHz
- The saving in power of a DSB-SC system compared to AM when modulated at 80% is (A) nil (B) 80% (C) 76% (D) 50%
- In a PCM system, when the number of bits is increased from 5 to 8, the SNR increases by a factor (A) 4 (B) 16 (C) No change (D) 64
- An anti-aliasing filter (AAF) is a filter used before a signal sampler to restrict the bandwidth of a signal to satisfy the Nyquist-Shannon sampling theorem. Select the AAF from the given options. (A) High-pass filter (B) Low-pass filter (C) Band-pass filter (D) Band-stop filter
- Oversampling is employed for (A) increasing the resolution (B) decreasing the resolution (C) increasing the noise (D) decreasing the noise
- Photoconductive devices consist of a thin single-crystal or polycrystalline film of compound semiconductor substances. A photoconductive cell is made using which of the following materials? (A) Selenium (B) Quartz (C) Rochelle salt (D) Lithium sulphate