Selection of an instrument depends on some static and dynamic performance characteristics. The characteristic that relates to the fact as to how closely the instrument reading follows the measured variables is called (A) accuracy (B) precision (C) fidelity (D) sensitivity
Asked in APSC INSTRUMENTATION
Show answer
Answer: C. fidelity
More APSC Prelims previous year questions questions
- A Wheatstone bridge requires a change of 6 Ω in the unknown arm of the bridge to produce a change in deflection of 3 mm of the galvanometer. The sensitivity of the instrument is (A) 0-5% (B) 2% (C) 0-5 mm/Ω (D) 2-0 Ω/mm
- In the inferential type of flow-measuring methods, the flow rate is inferred from the characteristic effect of a related phenomenon. The inferential types of flow meters are (A) variable head or differential meters (B) variable area meters (C) turbine meters (D) All of the above
- In the inline rotating torque sensor, the strain gauges are kept on the shaft precisely at (A) 90° to the shaft axis (B) 30° to the shaft axis (C) 60° to the shaft axis (D) 45° to the shaft axis
- A message signal contains three frequencies 5 kHz, 10 kHz and 20 kHz respectively. The bandwidth of the AM (amplitude modulated) signal is (A) 40 kHz (B) 30 kHz (C) 20 kHz (D) 10 kHz
- The saving in power of a DSB-SC system compared to AM when modulated at 80% is (A) nil (B) 80% (C) 76% (D) 50%
- In a PCM system, when the number of bits is increased from 5 to 8, the SNR increases by a factor (A) 4 (B) 16 (C) No change (D) 64
- An anti-aliasing filter (AAF) is a filter used before a signal sampler to restrict the bandwidth of a signal to satisfy the Nyquist-Shannon sampling theorem. Select the AAF from the given options. (A) High-pass filter (B) Low-pass filter (C) Band-pass filter (D) Band-stop filter
- Oversampling is employed for (A) increasing the resolution (B) decreasing the resolution (C) increasing the noise (D) decreasing the noise