Apex distance in a simple curve is indicated by ____, where R is radius of curvature and \(\theta\) is degree of curvature.
Asked in APPSC (Arunachal) Question Booklet (Set-A) of Paper I and Paper II 2026
Show answer
Answer: D. \(R[\sec(\theta / 2) - 1]\)
More APPSC Prelims previous year questions questions
- Contour line is an imaginary line connecting points of
- Centering, levelling and orientation are the order of setting up a
- A super-elevation e is provided on a circular horizontal curve such that a vehicle can be stopped on the curve without sliding. Assuming a design speed v and maximum coefficient of side friction fmax, which one of the following criteria should be satisfied?
- A bitumen sample has been graded as VG30 as per IS : 73-2013. The '30' in the grade means that
- A survey line was measured to be 285.5 m with a tape having a nominal length of 30 m. On checking, the true length of the tape was found to be 0.05 m too short. If the line lay on a slope of 1 in 10, the reduced length (horizontal length) of the line for plotting of survey work would be
- Bituminous materials are commonly use in highway construction because of their good
- The following statements are related to temperature stresses developed in concrete pavement slabs with free edges (without any restraint) : (P) The temperature stresses will be zero during both day and night times if the pavement slab is considered weightless. (Q) The temperature stresses will be compressive at the bottom of the slab during night if the self-weight of the pavement slab is considered. (R) The temperature stresses will be compressive at the bottom of the slab during day time if the self-weight of the pavement slab is considered. The true statement(s) is(are)
- A soil sample has a void ratio of 0.5 and its porosity will be close to