Bulk modulus is a measure of a substance's resistance to uniform compression.
Bulk Modulus for a perfectly rigid body is
Asked in ukpsc 2025 2025 · Topic: Mechanics (Elasticity (Stress, Strain, Hooke's Law, Elastic Moduli))
More Physics questions
- If the principal stresses in a plane stress problem, are $\sigma_1 = 100$ MPa, $\sigma_2 = 40$ MPa, the magnitude of the maximum shear stress in MPa will be - (5) Question not attempted
- The Young’s modulus of elasticity of steel is 210 GPa, and the Poisson’s ratio is 0.29. The shear modulus will be : - (5) Question not attempted
- Maximum shear stress developed on the surface of a solid circular shaft under pure torsion is 240 MPa. If the shaft diameter is doubled, the maximum shear stress developed corresponding to the same torque will be : - (5) Question not attempted
- A cylindrical rod of length, l and diameter, d, is rigidly fixed at its upper end and hangs vertically. The elongation produced in the rod due to its total self weight, W is: - (5) Question not attempted Where A is area of cross-section of cylindrical rod and E is modulus of elasticity.
- A gradually varying cross-section tapering bar with diameter of the end sections being d1 and d2 and a bar having uniform cross section with diameter d have the same length L and subjected to the same axial pull P and are made of same material, then both the bars will have the same extension if d is equal to : - (5) Question not attempted
- A simply supported beam of constant flexural rigidity and length 2L carries a concentrated load P at its mid span and the maximum deflection under the load is δ. A cantilever beam of the same flexural rigidity and length L is subjected to load P at its free end. Determine the relation between the deflection at free end of the cantilever with δ. - (5) Question not attempted
- A steel member of area of cross section 1000 mm², having a length of 1 m is subjected to an axial compressive load of 10 kN. Assuming the case of pure compression in the member, the axial deflection is given by: (Take E = 200 GPa) - Question not attempted
- The S-N curve for steel becomes asymptotic nearly at - Question not attempted