Heterodyne principle is used in
Asked in RPSC Vice Principal/Superintendent ITI Screening Test 2012 VPITI-Electronic-and-Communications
Show answer
Answer: B. Receiver
More RPSC Prelims previous year questions questions
- For an AM wave, the maximum voltage was found to be 10 V and the minimum voltage was found to be 5V. The modulation index of the wave would be
- The FM telemetry as compared with AM telemetry requires a channel that is
- An angle-modulated signal is expressed by f_a(t) = cos(2×10^8 πt + 75 sin 2×10^3 πt). The peak frequency deviation of the carrier is then
- For 10-bit PCM system, the signal to quantization noise ratio is 62dB. If the number of bits are increased by 2, then the signal to quantization noise ratio will
- Ques # :90 A 8 kHz communication channel has an SNR of 30 dB. If the channel bandwidth is doubled, keeping the signal power constant, the SNR for the modified channel will be 1) 27 dB 2) 30 dB 3) 33 dB 4) 60 dB
- Ques # :91 What is the SNR improvement with FSK over ASK in most types of noise environment ? 1) 200 to 300 dB 2) 3 to 4 dB 3) 10 to 12 dB 4) 0 dB
- Ques # :92 Consider minimum shift keying (MSK) also known as fast FSK with frequency spacing 2 f_d between the state frequencies. r_b is the data rate. Which one of the following correctly relates r_b and f_d ? 1) f_d = r_b/4 2) f_d = r_b / 2 3) f_d = 3r_b/4 4) f_d = r_b
- Ques # :94 The bandwidth of an n-bit binary coded PCM signal for an original signal bandwidth of B Hz is 1) B Hz 2) n B Hz 3) B/n Hz 4) n^2 B Hz