Ques # : 3 In a BJT, the Ic= 30mA. If β = 100, the base current approximately equals 1) 0.03 mA 2) 300 mA 3) 0.3 mA 4) 30 mA
Asked in RPSC Vice Principal/Superintendent ITI Screening Test 2012 VPITI-Electronic-and-Communications
Show answer
Answer: A. 0.03 mA
More RPSC Prelims previous year questions questions
- Ques # : 4 The value of VBE,sat in pnp Ge transistor typically equals 1) -0.1 Volt 2) -0.3 Volt 3) -0.8 Volt 4) +0.8 Volt
- Ques # : 5 Transistor is usually encapsulated in 1) graphite powder 2) enamel paint 3) epoxy resin 4) Any of these
- Ques # : 6 The JFET can operate in 1) depletion mode only 2) enhancement mode only 3) either depletion or enhancement mode at a time 4) both depletion or enhancement modes simultaneously
- Ques # : 7 The following constitutes an active circuit element 1) FET 2) BJT 3) Diode 4) a current source
- Ques # : 8 In the fabrication of a buried layer n-p-n transistor, the processes involved are 1. diffusion 2. oxidation 3. epitaxy 4. lithography The correct sequence in which these processes are to carried out, is 1) 2, 4, 3, 1 2) 4) 2, 1, 3 3) 2) 4, 1, 3 4) 4, 2, 3, 1
- Ques # : 9 The output current versus input voltage transfer characteristic of an n-channel JFET is such that there is 1) zero current flow at zero input voltage bias 2) current flow only when a positive input threshold voltage is crossed. 3) current flow only when a negative input cut-off voltage bias is crossed. 4) no cut-off input voltage
- Ques # : 10 An SCR triggered by a current pulse through its gate can be turned off by 1) giving another pulse of the same polarity to the gate 2) by giving pulse to the cathode 3) by giving pulse to the anode 4) by reversing the polarity of anode and cathode voltage
- Ques # : 11 An operational amplifier is a 1) high gain CE amplifier 2) cascaded CE amplifier 3) high gain direct coupled amplifier 4) high gain CB amplifier