Electricity and water are a dangerous combination. Always disconnect the power source before attempting to clean or handle any electrical appliance or cord that is wet to prevent electric shock.
Which of the following is the safest way to handle a wet electrical cord?
Asked in JUNIOR laboratory assistant 2025 · Topic: Electric Current (Ohm's Law, resistance, resistivity, and conductivity)
More Physics questions
- A straight wire of mass 200 g and length 1.5 m carries a current of 2 A. It is suspended in mid air by a uniform horizontal magnetic field $ \vec{B}$? (Ignore the earth's magnetic field and take $g = 9.8 \text{ m/s}^2$) What is the magnitude of the magnetic field $\vec{B}$?
- A charge of 1 coulomb is placed near a grounded conducting plate at a distance of 1 m. What is the force between them?
- A DC series motor is driving a constant torque load, at 500 r.p.m., the field turns are divided into two groups connected in series. If the field turns are connected in parallel, then speed will be
- The full-scale deflection current of a meter is 1 mA and its internal resistance is 100 $ \Omega$. This meter is to have full deflection when 100 V is measured. What is the value of series resistor to be used?
- A transmission line having a surge impedance of $400 \Omega$ is connected with a cable which has surge impedance of $40 \Omega$. A surge magnitude of $100$ kV is travelling from the transmission line towards the cable. The transmitted voltage will be
- A transmission line having a surge impedance of $400 \Omega$ is connected with a cable which has surge impedance of $40 \Omega$. A surge magnitude of $100 \text{ kV}$ is travelling from the transmission line towards the cable. The transmitted voltage will be
- A two-winding 220 V/110 V, 1.5 kVA transformer is reconnected as a 220 V/330 V auto- transformer. It is rerated as
- The power is transmitted through a transmission line of impedance (r+jx) at equal voltage at both ends. The maximum power can be transferred under the steady-state condition if