A steel beam and an aluminium beam of identical dimensions are subjected to the same bending moment. The Young's modulus of steel is twice that of aluminium. Assuming both materials are linearly elastic and isotropic, which statement about their bending behaviour is correct?
Asked in GPSC Gujarat Engineering Service (Civil), Class-1 and Class-2 2026
Answer under review: our editors are checking this question. Try the other GPSC Prelims previous year questions questions meanwhile.
More GPSC Prelims previous year questions questions
- A thin rectangular plate is subjected to the following plane stress state: σx = 120 MPa (Tensile), σy = 60 MPa (Tensile) and τxy = 40 MPa. What is the maximum in-plane shear stress (τmax)?
- In a plane strain condition, εx = 400×10–6, εy = –100×10–6 and γxy = 300×10–6. What is the volumetric strain?
- The volumetric strain for a cube under triaxial stresses εx = 100 MPa, εy = 100 MPa, εz = 300 MPa, (tension) E = 200, GPa = 200 × 103 MPa and ν = 0.3 is
- If G = 40 GPa and ν =0.3, what is the value of E?
- A cube of material is under a hydrostatic pressure of 30 MPa. What is the shear stress on the face?
- A shaft is subjected to axial load and torsion simultaneously. Which stress theory should be used?
- A ductile steel component has a yield strength σy = 300 MPa. At a critical point, the principal stresses are σ1 = 200 MPa (tensile), σ2 = 100 MPa (tensile) and σ3 = 0. What is the factor of safety against yielding according to the Maximum Shear Stress Theory?
- A component made of steel (yield strength σy = 400 MPa) is subjected to plane stress: σ1 = 220 MPa, σ2 = 80 MPa and τ12 = 60 MPa. What is the von Mises stress and is the component safe according to the Distortion Energy Theory?