A thin rectangular plate is subjected to the following plane stress state: σx = 120 MPa (Tensile), σy = 60 MPa (Tensile) and τxy = 40 MPa. What is the maximum in-plane shear stress (τmax)?
Asked in GPSC Gujarat Engineering Service (Civil), Class-1 and Class-2 2026
Answer under review: our editors are checking this question. Try the other GPSC Prelims previous year questions questions meanwhile.
More GPSC Prelims previous year questions questions
- In a plane strain condition, εx = 400×10–6, εy = –100×10–6 and γxy = 300×10–6. What is the volumetric strain?
- The volumetric strain for a cube under triaxial stresses εx = 100 MPa, εy = 100 MPa, εz = 300 MPa, (tension) E = 200, GPa = 200 × 103 MPa and ν = 0.3 is
- If G = 40 GPa and ν =0.3, what is the value of E?
- A cube of material is under a hydrostatic pressure of 30 MPa. What is the shear stress on the face?
- A shaft is subjected to axial load and torsion simultaneously. Which stress theory should be used?
- A ductile steel component has a yield strength σy = 300 MPa. At a critical point, the principal stresses are σ1 = 200 MPa (tensile), σ2 = 100 MPa (tensile) and σ3 = 0. What is the factor of safety against yielding according to the Maximum Shear Stress Theory?
- A component made of steel (yield strength σy = 400 MPa) is subjected to plane stress: σ1 = 220 MPa, σ2 = 80 MPa and τ12 = 60 MPa. What is the von Mises stress and is the component safe according to the Distortion Energy Theory?
- A critical concrete beam in a bridge is experiencing the following stresses at a point where the axial tension threatening to crack is 80 MPa, the lateral pressure resisting deformation is 40 MPa and the shear stress trying to slide it apart is 30 MPa. Determine the radius of Mohr’s Circle to assess failure risk.