In a milling process, an HSS cutter of 120 mm diameter with 8 number of teeth is used to mill a component. If the cutting speed is 24 m/min and table feed rate is 0.12 mm/tooth, the time required to complete the machining length of 115 mm is
Asked in APPSC (Arunachal) Question Booklet (Set-A) of Paper I and Paper II 2026
Show answer
Answer: A. 2.19 min
More APPSC Prelims previous year questions questions
- Choose the wrong statement.
- A mild steel rod 300 mm long, 25 mm diameter is to be turned to reduce its diameter to 24 mm in one cut. If the rod is rotating at 510 rpm, the cutting speed would be equal to
- Knurling operation on lathe is used for
- Which tool-holding feature is found only in turret lathe and not in centre lathe?
- While cutting threads on a lathe using a single-point tool, the feed direction is
- A drill depth shows a tapered hole instead of straight. The most likely reason is
- A single-point tool is used for cutting a metric thread of 1.5 mm pitch. If the spindle rotates at 300 rpm, then the linear feed of the tool in mm/min is
- An M12 × 1.75 mm internal thread is to be tapped. The size of the hole to be drilled is