In machining mild steel with carbide tool (n = 0.2), if cutting speed is doubled, tool life will approximately become
Asked in APPSC (Arunachal) Question Booklet (Set-A) of Paper I and Paper II 2026
Show answer
Answer: D. 1/32 times
More APPSC Prelims previous year questions questions
- For ceramic tool (n = 0.15), at V1 = 300 m/min, T1 = 45 min. What speed of V2 gives T2 = 15 min?
- For finishing operations, tool life is frequently limited by
- In a taper turning process performed in a lathe, if D = large diameter and d = small diameter and l = length of the job, then tangent of half of the taper angle is
- The process of removing metal by rotating cutter, which is rotated in a direction opposite to the table feed direction, is known as
- ______ is the operation used for making a conical chamfer on the edge of the hole.
- Which of the following is a kinematic pair mismatch in machine tool motions?
- In a milling process, an HSS cutter of 120 mm diameter with 8 number of teeth is used to mill a component. If the cutting speed is 24 m/min and table feed rate is 0.12 mm/tooth, the time required to complete the machining length of 115 mm is
- Choose the wrong statement.