Ques # :24 The condition for heat dissipation in a parabolic fin to be independent of the distance from the base of the fin is (where δ is the thickness of the fin, b is the width of the fin at the base, L is the length of the fin and Bi is the Biot number) 1) δ/2 / L = Bi/2 2) δ/2 / L = √(Bi/2) 3) δ/2 / b = √(Bi/2) 4) b / L = √Bi
Asked in RPSC 02Jun 2016Question Paper for Asst. Engineer (Mechanical) GWD Screening Test - 2014ASST. ENGINEER - 2014
Answer under review: our editors are checking this question. Try the other RPSC Prelims previous year questions questions meanwhile.
More RPSC Prelims previous year questions questions
- Ques # :25 The effectiveness of an infinitely long rectangular fin is NOT increased by 1) increasing thermal conductivity of the fin material 2) increasing heat transfer coefficient 3) decreasing heat transfer coefficient 4) decreasing area of cross section of the fin
- Ques # :26 The hydrodynamic and thermal boundary layers will have equal thickness when 1) Prandtl Number = 1 2) Nusselt Number = 1 3) Prandtl Number = Nusselt Number for any Prandtl Number 4) Prandtl Number = 10
- Ques # :27 For free convection in laminar region on vertical plates, the correlation is given by (Nu = Nusselt Number, Pr = Prandtl Number and Gr = Grashof Number): 1) Nu = 0.13 (Gr.Pr) 2) Nu = 0.59(Gr.Pr)^0.25 3) Nu = 0.15(Gr.Pr)^0.33 4) Nu = 0.27(Gr.Pr)^0.25
- Ques # :28 Prandtl number is the ratio of 1) kinematic viscosity to thermal diffusivity 2) inertia force to viscous force 3) buoyant force to viscous force 4) None of these
- Ques # :30 In a counter flow heat exchanger, the thermal capacities of both the hot and cold fluids are the same. If NTU of the heat exchanger is 1, then the effectiveness of the heat exchanger is 1) 0.5 2) 2 3) 0.75 4) None of these
- Ques # :31 Cylindrical parabolic solar concentrators can give temperatures in the range of 1) less than 50°C 2) 50°C to 100°C 3) 100°C to 200°C 4) 300°C to 400°C
- Ques # :32 What is the theoretical cycle on which the SI engines work? 1) Otto cycle 2) Diesel cycle 3) Ericson cycle 4) Carnot cycle
- Ques # :33 Which of the following is associated with the valve operating mechanism? 1) Gudgeon pin 2) Crown 3) Tappet 4) Distributor