The forces F₁ and F₂ in a brake band and the direction of rotation of the drum are as shown in the figure. The coefficient of friction is 0.25. The angle of wrap is 3π/2 radians. It is given that R = 1 m and F₂ = 1 N. The torque (in N-m) exerted on the drum is ___
Asked in RPSC 02Jun 2016Question Paper for Asst. Drilling Engineer (Mines and Geology Deptt.) Screening Test- 2014ASST. DRILLING ENGINEER - 2014
Show answer
Answer: A. 2.248
More RPSC Prelims previous year questions questions
- Ques # :53 Errors generally distributed in accordance with the Goussian distribution are :
- Ques # :54 Ball bearing are made from:-
- Ques # :55 Instrument used to measure the flow through open canal:-
- Ques # :56 The torque that can be transmitted safely by the spur gear tooth at zero pitch line velocity is known as:-
- Ques # :57 M 20 bolt has a shank of 50 mm length and a thread of 25 mm length. It is subjected to a tensile load of 10kN. Young's modulus of bolt material is 205000 N/mm². Dc = 0.8d. The strain energy stored in the bolt, if the shank of the bolt is turned down to root of the thread, is:-
- Ques # :58 Two plates are joined by a parallel fillet weld. The plate is subjected to a tensile load of 340 kN. The working stress in shear for weld material is 80 Mpa. The length of 15 mm weld received to resist load is:-
- Ques # :60 A steam pipe is covered with two layers of insulating materials, with the better insulating material forming the outer part. If the two layers are interchanged, the heat conducted:- 1) Will decrease 2) Will increase 3) Will remain unaffected 4) may increase or decrease depending upon the thickness of each layer
- Ques # :61 A plane wall of thickness 2L has a uniform volumetric heat source q"(W/m3). It is exposed to local ambient temperature Tα at both the ends(x=±L). The surface temperature Ts of the wall under steady-state condition (where h and k have their usual meanings) is given by: 1) Ts = Tα + q* L / h 2) Ts = Tα + q* L2 / 2k 3) Ts = Tα + q* L2 / h 4) Ts = Tα + q* L3 / 2k