Which of the following parameters are true when the cavitation parameter σ =0 ? i. The local pressure is reduced to vapour pressure ii. Cavitation starts iii. Boiling of liquid starts iv. Cavitation stops
Asked in RPSC 02Jun 2016Question Paper for Asst. Drilling Engineer (Mines and Geology Deptt.) Screening Test- 2014ASST. DRILLING ENGINEER - 2014
Show answer
Answer: D. (i), (ii) and (iii)
More RPSC Prelims previous year questions questions
- The forces F₁ and F₂ in a brake band and the direction of rotation of the drum are as shown in the figure. The coefficient of friction is 0.25. The angle of wrap is 3π/2 radians. It is given that R = 1 m and F₂ = 1 N. The torque (in N-m) exerted on the drum is ___
- Ques # :53 Errors generally distributed in accordance with the Goussian distribution are :
- Ques # :54 Ball bearing are made from:-
- Ques # :55 Instrument used to measure the flow through open canal:-
- Ques # :56 The torque that can be transmitted safely by the spur gear tooth at zero pitch line velocity is known as:-
- Ques # :57 M 20 bolt has a shank of 50 mm length and a thread of 25 mm length. It is subjected to a tensile load of 10kN. Young's modulus of bolt material is 205000 N/mm². Dc = 0.8d. The strain energy stored in the bolt, if the shank of the bolt is turned down to root of the thread, is:-
- Ques # :58 Two plates are joined by a parallel fillet weld. The plate is subjected to a tensile load of 340 kN. The working stress in shear for weld material is 80 Mpa. The length of 15 mm weld received to resist load is:-
- Ques # :60 A steam pipe is covered with two layers of insulating materials, with the better insulating material forming the outer part. If the two layers are interchanged, the heat conducted:- 1) Will decrease 2) Will increase 3) Will remain unaffected 4) may increase or decrease depending upon the thickness of each layer