A large hydraulic turbine is to generate 300 kW at 100 rpm under a head of 40 m. For initial testing, a 1:4 scale model of the turbine operates under a head of 10 m. The power generated by model (in kW) will be :-
Asked in RPSC 02Jun 2016Question Paper for Asst. Drilling Engineer (Mines and Geology Deptt.) Screening Test- 2014ASST. DRILLING ENGINEER - 2014
Show answer
Answer: A. 2.34
More RPSC Prelims previous year questions questions
- Which of the following parameters are true when the cavitation parameter σ =0 ? i. The local pressure is reduced to vapour pressure ii. Cavitation starts iii. Boiling of liquid starts iv. Cavitation stops
- The forces F₁ and F₂ in a brake band and the direction of rotation of the drum are as shown in the figure. The coefficient of friction is 0.25. The angle of wrap is 3π/2 radians. It is given that R = 1 m and F₂ = 1 N. The torque (in N-m) exerted on the drum is ___
- Ques # :53 Errors generally distributed in accordance with the Goussian distribution are :
- Ques # :54 Ball bearing are made from:-
- Ques # :55 Instrument used to measure the flow through open canal:-
- Ques # :56 The torque that can be transmitted safely by the spur gear tooth at zero pitch line velocity is known as:-
- Ques # :57 M 20 bolt has a shank of 50 mm length and a thread of 25 mm length. It is subjected to a tensile load of 10kN. Young's modulus of bolt material is 205000 N/mm². Dc = 0.8d. The strain energy stored in the bolt, if the shank of the bolt is turned down to root of the thread, is:-
- Ques # :58 Two plates are joined by a parallel fillet weld. The plate is subjected to a tensile load of 340 kN. The working stress in shear for weld material is 80 Mpa. The length of 15 mm weld received to resist load is:-